Movicon.NExT™ 4.1 ist die innovativste und flexibelste Industriesoftware-Plattform für Projekte zum Bedienen und Beobachten unter Windows und Linux, für die Prozessüberwachung, für Produktionsanalysen und Effizienzsteigerung und für Produktionsleitsysteme im Hinblick auf Industrie 4.0
Damit steht den Profis der Automatisierung eine modulare, offene Plattform zur Verfügung. Sie erfüllt alle Anforderungen aus den Bereichen Bedienen, Beobachten, Überwachen, Steuern, Datenaufzeichnung, Fertigungsmanagement und industrielle Datenanalyse. Technologischer Fortschritt ist ein Muss, wenn man in der Welt der Automatisierung bestehen will.
Basierend auf den Konzepten des “Plug-Ins” ermöglicht es maximale Interoperabilität mit dem System, so dass neue Funktionsmodule in das Emerson Framework integriert werden können und die eigenen .NET-Lösungen vollständig angepasst werden können.
Entwickelt, um maximale Skalierbarkeit zu gewährleisten, und ermöglicht es Ihnen, auf einfache und flexible Weise eine einzige Konfigurationsumgebung für modulare Lösungen zu verwenden.
Dank Assistenten und Vorlagen, Symbolbibliotheken und Toolboxen werden die Entwicklungszeiten drastisch reduziert.
Es handelt sich um eine Softwaretechnologie, die vollständig auf Marktstandards basiert und aus der Offenheit und Zuverlässigkeit resultieren.
Die Sicherheit wird sowohl bei der Datenverwaltung zwischen Client und Server als auch bei der Benutzer- und Kennwortverwaltung dank verschiedener Authentifizierungsmodelle gewährleistet.
Es basiert auf der innovativen OPC UA-Technologie. Dies gewährleistet maximale Konnektivität nativ zu jedem Gerät oder Anwendungsmodul, das auf dieser Technologie basiert und unübertroffene Eigenschaften für Sicherheit und Leistung bietet.
Mit der Server-Alarmverwaltung können Sie die Projektalarme und Ereignismeldungen vollständig und anpassbar konfigurieren und verwalten. Dies garantiert maximale Präzision bei der Ereignisverwaltung bei maximaler Vollständigkeit der Informationen für die Bediener. Alarme und Meldungen können gemäß ISA S-18 und der OPC UA A & E-Spezifikation für die Verwaltung von EIN-, AUS-, ACK-, RST- und SHELVE-Ereignissen konfiguriert werden.
Überall dort, wo Sie Ihre historischen Daten aufzeichnen möchten, bietet Movicon.NExT leistungsstarke Tools für die Analyse und Berichterstellung. Trends, Grafiken, Tabellen, Datenanalysen und ein leistungsstarker integrierter Berichts-Designer bieten anspruchsvolle Analyselösungen sowohl lokal als auch über das Internet. Die Analyse historischer Daten in Movicon.NExT ist vollständig integriert, erfordert keine zusätzlichen Tools und ermöglicht jeglichen Zugriff auf die Datenbank, Datenextraktion und grafische oder tabellarische Darstellung. Der Berichts-Designer ermöglicht die Erstellung und Verwaltung von lokalen oder Webberichten mit unerreichtem Potenzial. Web Dashboards ermöglichen die Datenanalyse über den HTML5 Web Client.
Der Movicon.NExT™ -Datenserver ermöglicht die effiziente Aufzeichnung aller Daten, die von der Automation Platform.NExT-Plattform verwaltet werden, sowohl mit Historian- als auch mit Data Logger-Technologie. Die VFS-Technologie (Virtual File System) bietet Datenabstraktion in Bezug auf das Aufzeichnungsmedium. Standardmäßig werden Daten im MS SQL Server-Format aufgezeichnet. Es ist jedoch möglich, die bereits für Oracle, My SQL-Datenbanken eingerichteten Konnektoren oder Cloud-Technologien wie Microsoft Azure zu verwenden.
Es ermöglicht die Erstellung neuer dynamischer vektorgrafischer Schnittstellensysteme, sowohl 2D als auch 3D. Grafikbibliotheken wurden komplett neu gestaltet, um Objekte und Symbole von höchster Qualität bereitzustellen.
Um maximale Portabilität zu gewährleisten auf Plattformen und Betriebssystemen anders, dank des Standards und maximale Leistung und Grafiken.
Die Geschwindigkeit bei der Kommunikation und Verwaltung von Echtzeitdaten sowie die Optimierung der Grafik garantieren maximale Technologie ohne Leistungseinbußen.
Movicon.NExT ist für das Betriebssystem Windows 10 (in allen Versionen) ausgelegt und wird im Current Branch (CB) und Current Branch for Business (CBB) vollständig unterstützt.
Für das gewünschte Webinar oder Training auf Deutsch kontaktieren Sie bitte Emerson Deutschland GmbH unter [email protected] oder +49 (0)7721 99 838-0.
Dieser Kurskalender enthält die Termine für die kostenlosen Standard-Kurse oder Webinare über die Emerson-Softwaretechnologien.
Company Name | Address | Phone Number | E-mail Address | Web Site | Sectors |
---|---|---|---|---|---|
ETM SRL | Via F. Budi, 71 84018 Scafati (NA) |
081 8509071 | [email protected] | www.etmgroup.it | Automazione Industriale |
The Omron FINS Ethernet driver was designed specifically for the use with OMRON programmable controllers. This protocol connect a number of OMRON controllers over an Ethernet network.
This section cannot be accessed by “Guest” users and requires the “User” level reserved for customers who own development license. If you own a development license and have not yet been enabled at User level, please send a request email to [email protected], specifying the Serial Number of your development license and the Username to be enabled.
Movicon.NExT – Ver. 4.2.353
The EIBus – Konnex Driver was designed specifically to get in communication with Building Automation Devices, connected through EIB bus, or with the new Konnex System, which is the compatible successor of EIB.
EIB devices, like lights, dimmer, lamps, curtains, switches, …, have to be configured for their net address with the aid of the ETS software. In order to operate correctly with EIB devices, a good knowledge of the Konnex architecture and of the ETS software is required. For more information about this bus and the related tools, please refer to www.knx.org
Our driver can operate in Ethernet communication, where the link between IP network and EIB devices are one or more EIBNet/IP routers. Each communication channel requires a dedicated interface.
This section cannot be accessed by “Guest” users and requires the “User” level reserved for customers who own development license. If you own a development license and have not yet been enabled at User level, please send a request email to [email protected], specifying the Serial Number of your development license and the Username to be enabled.
Movicon.NExT – Ver. 4.2.353
The BACnet/IP driver provides communication with devices supporting BACnet protocol in its implementation over IP.
BACnet is a protocol defined by ASHRAE (American Society of Heating, Refrigeration and Air-conditioning Engineers). The ANSI/ASHRAE Standard 135-2004 document contains the protocol definition. Annex to the document contains specification of the BACnet transported over IP, which is the implementation chosen for this driver.
The BACnet protocol has a number of services that permit to read/write the properties of the configured Data Objects. In order to get the value of the property “Present_Value”, it is possible to choose between two ways : sending a request “ReadProperty” or subscribing a COV (Change Of Value) notification for the Data Object. Using the service “ReadProperty” means polling the object with a request, and receive an answer containing the data; using COV notification means subscribing to the device for a notification when the “Present_Value” of a Data Object changes. This second way results in a spontaneous message from the device, whenever a Present_Value changes its value, reducing the traffic at the minimum.
This section cannot be accessed by “Guest” users and requires the “User” level reserved for customers who own development license. If you own a development license and have not yet been enabled at User level, please send a request email to [email protected], specifying the Serial Number of your development license and the Username to be enabled.
Movicon.NExT – Ver. 4.2.353
The Siemens SINAUT ST1 driver has been designed to exchange data with Siemens devices equipped with modules that support the SINAUT ST1 protocol.
A connection must be established to remote devices in order to exchange data with them. The telecontrol LAN can be a dedicated or a switched LAN. This driver assumes that a serial connection (RS-232/RS-485) is available. If modems are used, the modem connection must be completely transparent for this driver.
The driver polls periodically the configured stations to get input data. For each station one input task must be defined. This input task is used by the driver to parse the received data and to pass them to the supervisor.
The driver permits also to send commands to the devices.
To achieve the maximum flexibility, the driver permits to define the device data structures (“Data Templates”), corresponding to the data that can be read/written from/to the devices. The drivers permits also to define the codes of the output commands (3 codes for each command).
This section cannot be accessed by “Guest” users and requires the “User” level reserved for customers who own development license. If you own a development license and have not yet been enabled at User level, please send a request email to [email protected], specifying the Serial Number of your development license and the Username to be enabled.
Movicon 11 – Rel. 11.4.1.5 DBL282
EtherNet/IP is an industrial networking standard that takes advantage of commercial off-the-shelf Ethernet communication chips and physical media. IP stands for ‘industrial protocol’ and it is what distinguishes this network. Unlike many options in the industrial Ethernet crowd, EtherNet/IP uses an open protocol at the application layer. Moreover, more than one vendor or organization backs EtherNet/IP. It is the only standard supported by three networking organizations: ControlNet International (CI), the Industrial Ethernet Association (IEA) and the Open DeviceNet Vendor Association (ODVA).
This driver has been expressly thought to communicate with Omron NJ PLC series over the Ethernet network. This driver uses symbolic tag addressing (tags names) with Ethernet/IP native commands.
This section cannot be accessed by “Guest” users and requires the “User” level reserved for customers who own development license. If you own a development license and have not yet been enabled at User level, please send a request email to [email protected], specifying the Serial Number of your development license and the Username to be enabled.
Movicon 11 – Rel. 11.4.1.6 DBL290
Movicon 11 CE – Rel. 11.4.1.6 DBL290
Movicon 11 – Unicode Rel. 11.4.1.6 DBL290 (Compatible with Version 11.6.1201 and later)
Movicon 11 CE – Unicode Rel. 11.4.1.6 DBL290 (Compatible with Version 11.6.1201 and later)
This driver is a third party driver, developed by Axel Software.
Emerson does not provide technical support for this third party driver. Contact technical support to download the drivers listed in the following links
This section cannot be accessed by “Guest” users and requires the “User” level reserved for customers who own development license. If you own a development license and have not yet been enabled at User level, please send a request email to [email protected], specifying the Serial Number of your development license and the Username to be enabled.
Movicon 11 – Rel. 11.4.1.4 DBL282
Movicon 11 CE – Rel. 11.4.1.4 DBL282
The Omron FINS Ethernet driver was designed specifically for the use with OMRON programmable controllers. This protocol connect a number of OMRON controllers over an Ethernet network.
This section cannot be accessed by “Guest” users and requires the “User” level reserved for customers who own development license. If you own a development license and have not yet been enabled at User level, please send a request email to [email protected], specifying the Serial Number of your development license and the Username to be enabled.
Movicon 11 – Rel. 11.4.1.11 DBL289
Movicon 11 CE – Rel. 11.4.1.11 DBL289
The SaiaDataMode driver has been developed to communicate with Saia-Burgess PCD series PLCs. It is a direct driver, not based on Saia libraries, making it possible to communicate in different ways:
This section cannot be accessed by “Guest” users and requires the “User” level reserved for customers who own development license. If you own a development license and have not yet been enabled at User level, please send a request email to [email protected], specifying the Serial Number of your development license and the Username to be enabled.
Movicon 11 – Rel. 11.4.1.9 DBL286
Movicon 11 CE – Rel. 11.4.1.9 DBL286
The Omron Host Link Driver was designed for use with Omron PLCs. The protocol Host Link is a serial multi-point protocol of type Master/Slave. The driver plays the role of master.
Movicon 11 – Rel. 11.4.1.8 DBL286
Movicon 11 CE – Rel. 11.4.1.8 DBL286
The Hilscher NetLink driver provides Simatic MPI communication to Siemens devices via the Hilscher ‘NetLink’ Ethernet interface. This driver was designed specifically for the use with Siemens S7 300 and 400 and VIPA System 200V, 300V, 300S and 500S series.
Before the Netlink device can be used, an appropriate system configuration must be set. In particular you have to specify a valid IP address for the Netlink device. For further details please refer to “Netlink configuration” .
A single Hilscher NetLink driver can manage communication with a single Netlink device. This does not prevent from communicating with more PLCs at a time.
As an example, you can connect 3 PLCs with different MPI IDs through a standard Profibus cable, then connect the Netlink device to the MPI port of one of the PLCs and you will access all the 3 PLCs data areas.
The driver should be configured with 3 stations, each one with the specific MPI station ID of the related PLC, but all the stations must have the same IP address (server address), that is the IP address of the Netlink device as specified in “Netlink configuration” .
The use of more Netlink devices at a time is possible by duplicating the driver, that is creating a copy on the driver for each Netlink device in use. For further details see “Driver duplication” in the Supervisor manual.
Movicon 11 – Rel. 11.4.1.5 DBL286
Movicon 11 CE – Rel. 11.4.1.5 DBL286
Company Name | Address | Phone Number | E-mail Address | Web Site | Sectors |
---|---|---|---|---|---|
Anblick Consultant Pvt. Ltd. | F/B – 64 Lajpat Nagar, Sahibabad, Ghaziabad, U.P, 201005 India |
+91-120-4238324 | [email protected] | Automation Process control Building automation |
|
Armax Automation Private Limited | NO 51& 54, 2nd Cross, Vinayaka Layout, Andhrahalli Main Road, Peenya 2nd Stage, Bangalore-91 India |
+91-80-32467600 | [email protected] | www.armaxindia.com | Automation Process control Building automation |
Equvera Applied Automation #5, VL Puram Main Road, Ambattur, Chennai, Tamil Nadu, India |
#5, VL Puram Main Road, Ambattur, Chennai, Tamil Nadu, India | Mob : +91 97898 15345 / +91 98848 35702 | [email protected] | www.equvera.com | Automation |