ThomasIslera

Risposte al Forum Create

  • In risposta a: Listbox

    31 gennaio 2020 alle 3:50 pm #35496
    ThomasIslera
    Partecipante

    Hi Simon,
    The error tell that you are not referencing the object properly with this script….

    try like this

    Dim objSyn As SynopticCmdTarget

    Dim objTabGroup As DrawCmdTarget

    Dim objDraw As DrawCmdTarget

    Set objSyn = GetSynopticObject

    Set objTabGroup = objSyn.GetSubObject(“TabScreen”)

    Set objDraw = objTabGroup.GetSubObject(“Tailcornsilo1Lb”)

    But you can’t simplify the process by putting 2 separate variables for each list box and eventually going to populate only the value of these variables via script without interface the object via script.
    I mean only “play” on the variables value to dynamically fill the list box items

    BR
    Thom

  • In risposta a: TAGs in BadTimeout after net fail

    31 gennaio 2020 alle 3:35 pm #35495
    ThomasIslera
    Partecipante

    Hi Multilogic,
    Are you using the last version of the driver available in the Movicon.NexT 3.4.268 setup? ;or maybe you are using an old version? I know Progea R&D released recently a new version of the driver.
    If you restart Movicon NExT the problem is solved?
    Maybe there is some setting in the modbus gateway , anyway try to start by looking errors in the Movicon logs
    Regards
    Thom

  • In risposta a: Update for WebClient

    16 gennaio 2020 alle 12:12 pm #35419
    ThomasIslera
    Partecipante

    Hi,
    Please try to explain better what kind of limitation you mean.
    My feeling is very good with the Next web client and I find it very flexible.
    When you implement the user management on the server application, web client side is also enabled.
    Movicon authenticate each web client session with a single user at the very beginning of each web session, and this seems normal to me since it is difficult to have several users working on the same web browser session.

    BR
    Tom

  • In risposta a: Report Parameters

    16 gennaio 2020 alle 12:03 pm #35418
    ThomasIslera
    Partecipante

    Hi
    I think you can use the SUM available with the calculated field in the report designer environment.

    BR
    Tom

  • In risposta a: error during declare "Dim Conn1 As New ADODB.Connection"

    16 gennaio 2020 alle 11:22 am #35417
    ThomasIslera
    Partecipante

    Hi Jeff,
    This kind of problem usually arises from the fact that you didn’t put the correct references in the script.
    If it is a script resource > Edit in the top menu > References and link the Microsoft Activex Data Object 2.6 library (msado26.tlb)

    I hope this helps with your development

    Best Regards
    Tom

  • In risposta a: Connessione Movicon Next ed S7-200

    16 gennaio 2020 alle 10:57 am #35416
    ThomasIslera
    Partecipante

    Hi Wangrenzhim
    Have you did progresses with the TSAP settings? Maybe sniffing the traffic with a tool like wireshark you can learn more about the settings.
    Unfortunately, the S7-200 PLC is a very old PLC, I don’t think tests are being carried out on products that have been out of production from many years.
    I can suggest at least a test with Movicon 11 where there is the suitable driver (I saw on the help some instructions to interface the S7-200) this in order to review the settings.
    BR
    Tom

  • In risposta a: Alarm dispatcher error

    3 gennaio 2020 alle 11:08 am #35273
    ThomasIslera
    Partecipante

    Hi Praveenraj,
    I don’t think you should touch those redundancy parameters. I’d leave the default settings.
    You can check the logs for retrieve eventual errors.
    Have you configured the notifications to be local in the AD or have you connected the server to read the notifications directly from the alarms?
    Regards
    Tom

  • In risposta a: Reading data from google spreadsheet

    3 gennaio 2020 alle 11:02 am #35272
    ThomasIslera
    Partecipante

    Hi Praveenraj,
    I think you can configure a button that opens the web browser with the “open application” command to access your google spreadsheet.
    Or you can directly integrate a web browser object inside the screen.
    Movicon NExT has in its tool box an object called Spread Sheet but is to interface local files.
    Regards
    Tom

  • In risposta a: Web Client – Data Analysis

    3 gennaio 2020 alle 10:39 am #35271
    ThomasIslera
    Partecipante

    Hi Zachary,

    In order to rule out specific problems with your application, Have You tried to run a test with the web client and the pre-installed Movicon “Trends” project
    You can find this sample project in this location :
    C:\Users\Public\Documents\Progea\Movicon.NExT\ExampleProjects 3.4\Trends

    My tip is to run a test with this one, in order to review the settings and if there are problems the advice is to open a ticket in the support because it seems to me a quite specific issue.

    Best Regards
    Tom

  • In risposta a: Mobile app not working

    3 gennaio 2020 alle 10:31 am #35270
    ThomasIslera
    Partecipante

    Hi Praveenraj,
    For the mobile apps the web client is managed through the web service…
    Select project name , then Service Control Panel , Web Client WPF
    Always follow these steps for the WPF service when you make modifications on the project to get aligned screens on the web client apps:
    1 Stop
    2 Unistall
    3 Install
    4 Start

    I hope this will help you …

    Best Regards
    Tom

  • In risposta a: When import .L5K file i don't see all tags

    19 novembre 2019 alle 12:03 pm #35031
    ThomasIslera
    Partecipante

    Hi Palladino,
    I can suggest 2 preliminary checks :
    -Verify that you are using the last EtherNetIP driver, version 11.4.1.22 available on this web site
    -Verify in the driver help , device information, if the variable type that you are importing is a supported data type for the driver.

    BR
    Tom

  • In risposta a: input string was not in a correct

    21 ottobre 2019 alle 5:08 pm #34731
    ThomasIslera
    Partecipante

    Hi Praveen
    Have you checked with the SQL Management Studio if you have the new data properly stored in the SQL from the datalogger ?

    If you cannot solve I suggest to try deleting the DB and having it recreated directly by Movicon.NExT.

    Maybe the DB was previously created with a different tables structure and now you are in conflict with the new project and the new DB structure.

    Bye

    Thomas

  • In risposta a: Open screen using dropdown

    21 ottobre 2019 alle 4:58 pm #34730
    ThomasIslera
    Partecipante

    Hi PRAVEENRAJ,
    You can configure an event that check the variable value….
    when the variable value is = to “mystring” , you can set a command to open the desired synoptic.
    Regards
    Thom

  • In risposta a: ActiveX software movicon 2000

    24 settembre 2019 alle 5:31 pm #34584
    ThomasIslera
    Partecipante

    Jan means spam 🙂

    • Questa risposta è stata modificata 5 mesi, 1 settimana fa da ThomasIslera.
  • In risposta a: Movicon Script

    24 settembre 2019 alle 5:30 pm #34583
    ThomasIslera
    Partecipante

    Hi
    have you already checked the example section?
    I noticed that in the ” Access to Files” folder there are some examples with some vb script customizations:
    ES_ReadWriteFile
    ES_ReadWriteExcelFile

    I think they’re very useful for your purpose.

    Regards
    Tommy